TSCA Import Certification: Positive or Negative, and Who Files It

The short answer

A TSCA import certification is a signed statement, filed with CBP before release, that a chemical shipment either complies with the Toxic Substances Control Act (positive) or is not subject to it (negative). The importer or its authorized agent files it for every TSCA chemical in bulk or in a mixture, with the certifier's name, phone and email, usually in ACE. Articles need one only when a TSCA rule says so. For a coatings maker running 500 chemical SKUs through two brokers, the work is deciding positive or negative once per product, then reusing it on every entry.

Next step:Check every deadline on one entry

In this post
  1. What is a TSCA import certification, and who has to sign it?
  2. Positive or negative: which TSCA certification does your shipment need?
  3. Do articles, samples and courier shipments need a TSCA certification?
  4. How is the TSCA certification filed in ACE, and when?
  5. What happens if CBP detains a shipment for TSCA?
  6. How do you keep one TSCA determination per product instead of per shipment?
  7. Where does GingerControl fit next to the TSCA file?
  8. Putting one TSCA answer per product into your entry flow
  9. References

The rule sits in two places: CBP's regulations at 19 CFR 12.118 to 12.127, issued under TSCA section 13, and EPA's companion policy at 40 CFR 707.20 [1] [2]. Both were read in their current eCFR text on November 17, 2026. This post covers the import certification only. How chemicals and plastics are classified under Chapters 28, 29, 38 and 39 is in our chemical and plastic tariff classification guide, and how agency flags attach to HTS codes is in PGA flags on HTS codes.

What is a TSCA import certification, and who has to sign it?

A TSCA import certification is the importer's written or electronic statement to CBP that a chemical shipment complies with TSCA, or that the chemicals in it are not subject to TSCA, and the importer or the importer's authorized agent signs it [1]. CBP's scope covers chemical substances in bulk form and as part of a mixture, TSCA-excluded chemicals, and articles only where an EPA rule requires it [1].

The obligation starts from how TSCA defines manufacturing. EPA's policy statement quotes the Act: "[M]anufacture means to import ..., produce, or manufacture" (15 U.S.C. 2602(7)) [2]. An importer of a resin carries the same TSCA duties as a domestic plant making it, and the certification is where that duty shows up on each entry.

Three facts decide who signs and how:

  • Certifier. The importer or its authorized agent, usually the customs broker transmitting the entry. The filing must include the certifier's name, phone number and email address [1].
  • Knowledge. EPA expects the certification to rest on the importer's actual knowledge in most cases. Where the importer does not know a mixture's composition, EPA says to ask another party to the transaction, such as the foreign manufacturer [2].
  • Form. Electronic filing goes to ACE, required since CBP's December 27, 2016 rule took effect on March 21, 2017. A paper certification is typed or stamped on the entry document or commercial invoice, or an attachment to it [1] [3] [4].

Positive or negative: which TSCA certification does your shipment need?

File a positive certification for any TSCA chemical substance in bulk or in a mixture, and a negative certification only for chemicals excluded from TSCA that are not clearly identified as such [1]. The two statements are fixed text. The positive one reads:

"I certify that all chemical substances in this shipment comply with all applicable rules or orders under TSCA and that I am not offering a chemical substance for entry in violation of TSCA or any applicable rule or order thereunder." (19 CFR 12.121(a)(1))

The negative one reads: "I certify that all chemicals in this shipment are not subject to TSCA." (19 CFR 12.121(a)(2)) [1].

EPA lists what the positive statement covers: section 5 premanufacture notification and significant new use rules, section 5(e) orders, section 5(f) rules and orders, section 6 rules and orders, section 7 judicial actions, and Title IV rules and orders. Sections 4 and 8 still bind importers but do not attach to individual shipments, so they sit outside the certification [4]. The negative statement is for pesticides, foods, food additives, drugs, cosmetics, devices, source material, special nuclear material or by-product material, and firearms and ammunition, when they are not already clearly identified. EPA says another agency's entry filing, such as a pesticide Notice of Arrival or the FDA entry data, can count as clear identification [4].

In practice there are four answers, not two. The fourth is the one a binary broker question hides.

AnswerWhen it appliesWhat goes on the entrySource
PositiveA TSCA chemical in bulk or in a mixture that complies with sections 5, 6 and 7 and Title IVThe positive statement and certifier contact19 CFR 12.121(a)(1); EPA import page
NegativeA TSCA-excluded chemical (pesticide, food, drug, cosmetic, device and others) not clearly identifiedThe negative statement and certifier contact19 CFR 12.121(a)(2); EPA import page
NoneAn article with no TSCA rule requiring certification; tobacco; an excluded product clearly identified by another agency's filingNo section 13 statement19 CFR 12.121(b); EPA import page
StopA new chemical not on the Inventory without a cleared notice or exemption, a SNUR use not notified, or an import over a 5(e) order limitNothing yet: the shipment cannot be certified positiveEPA import page; 40 CFR 707.20

Bottom line: For a chemicals manufacturer whose brokers ask "positive or negative?" on every entry, the useful answer is one of four, recorded per product. A "Stop" product needs EPA work before it ships, and a negative statement on a TSCA resin is a false certification, not a cautious one.

Do articles, samples and courier shipments need a TSCA certification?

Articles usually do not, R&D samples usually do, and a courier shipment follows the same rule as an ocean container. Under 19 CFR 12.121(b), an importer of a chemical that is part of an article certifies only "if required to do so by a rule or order issued under TSCA" [1].

CBP's definition of an article is narrow on purpose: a manufactured item formed to a specific shape or design, whose end use depends on that shape, and whose composition does not change in use beyond limited exceptions. "Fluids and particles are not considered articles regardless of shape or design" [1]. A coated steel bracket is an article. A pigment paste in a pail is not, and a resin pellet generally is not either.

Three cases trip up chemicals manufacturers:

  • Composite wood. EPA names TSCA Title VI as an article rule with its own import certification: hardwood plywood, particleboard, medium-density fiberboard and thin medium-density fiberboard panels, and component parts and finished goods containing them, imported from March 22, 2019. Importers also keep supplier compliance statements for three years [4].
  • R&D samples. EPA states that certification is required for substances received by mail or commercial carrier, "including those intended for research and development" [4]. A lab ordering a 5 kg additive sample from a sister plant needs the same answer as the production lot.
  • Courier entries. The express carrier usually transmits the entry and may certify as your authorized agent, but the answer still comes from your knowledge of the product [1] [2]. If the carrier asks for a TSCA statement, it is asking you for a determination.

How is the TSCA certification filed in ACE, and when?

The certification is filed before release of the shipment, in ACE or another CBP-authorized EDI system, or in writing with the director of the port of entry [1]. Every entry subject to certification carries the certifier's name, phone number and email address.

CBP moved electronic TSCA certification into ACE in a final rule published December 27, 2016 (CBP Dec. 16-28, 81 FR 94980), which also added the certifier contact requirement [3]. EPA lists March 21, 2017 as the effective date [4]. For a written certification, the statement is typed or stamped on the entry document or commercial invoice, or on an attachment to either. For immediate delivery releases and entries under 19 CFR 142.3, it goes on the commercial invoice or an attachment [1]. A facsimile signature is allowed [1].

The broker transmits the statement. The importer supplies the answer. For a team with two brokers, the same product needs the same answer from both, which is a records problem more than a filing problem. How long to keep the entry documents themselves is a separate CBP rule, covered in our guide to customs recordkeeping under 19 CFR 163.

What happens if CBP detains a shipment for TSCA?

CBP detains the shipment at the importer's risk and expense, notifies EPA and the importer with the reasons, and a fixed clock starts [1]. The triggers are a missing certification, reasonable grounds to believe the shipment does not comply, an EPA request to detain, or a ban or seizure order under TSCA sections 5, 6 or 7.

A missing certification is the easy case: EPA's policy says CBP "will refuse entry to any shipment until such time as the certification is properly submitted" [2]. A substantive problem runs on the regulation's deadlines, and the shipment can sit in CBP custody for only 48 hours before it moves to EPA for storage unless the port director releases it under bond [1].

A TSCA detention gives the importer 20 days to argue and 90 days to fix or export
  1. Detention noticeCBP notifies EPA and the importer, with the reasons for detention.
  2. Out of CBP custodyThe shipment goes to EPA for storage or disposition unless released to the importer under bond on CBP Form 301, held intact. (upcoming)
  3. Importer's documents dueLast day to send EPA written documentation, copied to the port director, showing why entry should not be refused. (upcoming)
  4. EPA decisionEPA allows or refuses entry within 10 days of the documents and no later than 30 days after the detention notice. (upcoming)
  5. Comply or exportBring the goods into compliance or export them within 90 days of detention or 30 days of a redelivery demand, whichever is first. After that, or after an extension of up to 30 days for EPA or CBP delays, they are considered unclaimed or abandoned and turned over to EPA. (upcoming)

Source: 19 CFR 12.122 to 12.124 and 12.127, eCFR text current as of November 13, 2026, read November 17, 2026

Two costs sit outside the clock. If goods released under bond are refused and not redelivered within 30 days of the demand, CBP assesses liquidated damages for the full amount of the bond [1]. If the importer abandons or misses the deadlines, it stays liable for storage and disposal [1]. Release under bond uses the importation bond conditions in 19 CFR 113.62, the same instrument covered in our customs bonds guide.

The penalty side is separate from the hold. TSCA section 16(a) sets a civil penalty of up to $37,500 per violation, with each day a violation continues counted as a separate violation [5]. EPA's inflation table in 40 CFR 19.4 puts that at $49,772 for penalties assessed on or after January 8, 2025 [6]. EPA's import policy adds the mitigating fact importers should plan around: "the good faith efforts of the importer to verify compliance, as evidenced by documents contained in his files, may obviate or mitigate the assessment of a civil penalty" [2].

How do you keep one TSCA determination per product instead of per shipment?

Decide positive, negative, none or stop once per product and formulation, keep the evidence with that decision, and let every entry reference it. The certification is filed per shipment, but nothing in 19 CFR 12.121 says the analysis behind it has to be redone per shipment [1].

Quotable insight: A TSCA certification is a statement about a product, filed on a shipment. Decide it once per product and formulation, keep the supplier composition data and Inventory check behind it, and let each entry reference that decision. Re-deciding per shipment invites two brokers to give two answers for one resin, and it leaves no file showing the good-faith effort that 40 CFR 707.20 says can mitigate a civil penalty.

The arithmetic is plain. A team shipping 40 chemical SKUs a week that answers per shipment makes 40 determinations a week, about 2,000 a year. A product record means 40 determinations once, then new work only for a new SKU, a new supplier or a changed formulation (worked example, not a measured figure).

A product-level TSCA record holds six fields:

FieldWhat to keepWhy
Product and formulation versionInternal SKU, supplier, formulation or recipe revisionA reformulation can change every answer below
ComponentsEach chemical substance with its CAS number and shareEPA's policy expects the importer to learn a mixture's constituents [2]
Inventory and section 5 statusOn the Inventory, exempt, or covered by a cleared notice; any SNUR or 5(e) order termsThe positive statement covers section 5 compliance [4]
Section 6 and Title IV checksWhether a section 6 rule or Title VI appliesNamed in EPA's list of what positive covers [4]
The answerPositive, negative, none or stop, with who decided and whenThe broker files this; the date shows when it was last checked
EvidenceSupplier declaration, SDS, email trail with the foreign manufacturerThe documents EPA says can mitigate a penalty [2]

Bottom line: For a chemicals manufacturer importing 300 to 800 SKUs through more than one broker, the product record is the control. The broker's question becomes a lookup, and a changed formulation, not a new shipment, is what reopens the decision.

Where does GingerControl fit next to the TSCA file?

GingerControl fits on the product data the TSCA file and the HTS file share, not on the certification itself: it does not make TSCA determinations, sign certifications or file entries. That stays with the importer, its customs broker and, where needed, counsel. The composition that decides a chemical's HTS chapter, a defined compound in Chapter 28 or 29 against a mixture in Chapter 38, is the same composition the TSCA certifier needs.

GingerControl builds GingerOS, the AI trade compliance platform that runs on each customer's own process: every classification carries its reason, and every change in the company triggers its own compliance recheck. For a chemicals manufacturer, GingerOS asks for the missing product facts, such as composition, before it suggests an HTS code, and records the reasoning for your approval. It also watches changes in ERP, PLM and supplier records and alerts the team when one affects them, so a reformulated product comes back for review instead of shipping on last year's answer.

GingerControl's Classification Researcher follows the reasoning a licensed customs broker uses: GRI analysis, Section and Chapter Note review, and CROSS ruling research. Its classifications are for general reference, educational, and planning purposes; before a code goes on an entry, your licensed customs broker reviews it. GingerControl is not a customs broker, does not file entries, and does not give legal advice.

Putting one TSCA answer per product into your entry flow

The broker's per-entry TSCA question is a symptom of a missing product record. GingerOS, the AI-native system that runs your trade compliance, asks for missing product facts before it suggests an HTS code and records the reasoning for your approval, so the composition behind each chemical SKU sits in one place your TSCA owner can read. It starts with Prototype Week: one call, then a clickable prototype of your own flow in three days. See GingerOS run on your own chemical SKUs

References

  1. eCFR, 19 CFR 12.118 to 12.127, Toxic Substances Control Act import regulations (CBP)
    Data cited: scope; article definition; positive and negative statements; filing before release in ACE or in writing with certifier name, phone and email; articles only if a TSCA rule requires; detention triggers; 48-hour custody limit; 20-day documentation window; 30-day EPA decision; release under bond; liquidated damages for the full bond; 90-day compliance or export limit; abandonment
    Source: 19 CFR 12.121
    Retrieved: November 17, 2026 (text current as of November 13, 2026)
  2. eCFR, 40 CFR 707.20, Chemical substances import policy (EPA)
    Data cited: "manufacture" includes import; certification expected to rest on actual knowledge; ask the foreign manufacturer when composition is unknown; documented good-faith efforts may obviate or mitigate a civil penalty; CBP refuses entry until the certification is properly submitted
    Source: 40 CFR 707.20
    Retrieved: November 17, 2026 (text current as of November 13, 2026)
  3. U.S. Customs and Border Protection, Toxic Substance Control Act Chemical Substance Import Certification Process Revisions, CBP Dec. 16-28
    Data cited: electronic TSCA certification in ACE; certifier name, phone and email added
    Source: 81 FR 94980
    Published: December 27, 2016
  4. U.S. Environmental Protection Agency, TSCA Requirements for Importing Chemicals
    Data cited: ACE filing effective March 21, 2017; who must certify; samples by mail or carrier including R&D; what positive certification covers; sections 4 and 8 outside the certification; negative certification list and clear identification; no certification for articles without a rule or for tobacco; Title VI composite wood certification from March 22, 2019 and three-year records
    Source: EPA, TSCA Requirements for Importing Chemicals
    Retrieved: November 17, 2026
  5. 15 U.S.C. 2615, TSCA section 16, Penalties
    Data cited: civil penalty up to $37,500 per violation; each day a violation continues is a separate violation
    Source: 15 U.S.C. 2615
    Retrieved: November 17, 2026
  6. eCFR, 40 CFR 19.4, Statutory civil monetary penalties, as adjusted for inflation
    Data cited: TSCA 15 U.S.C. 2615(a)(1) penalty of $49,772 for penalties assessed on or after January 8, 2025
    Source: 40 CFR 19.4
    Retrieved: November 17, 2026 (text current as of November 13, 2026)

Questions people ask

What does a positive TSCA import certification mean for a resin or additive shipment?

It means you state that every chemical substance in the shipment complies with all applicable rules and orders under TSCA. EPA reads that as covering section 5 new chemical and significant new use rules, section 5(e) and 5(f) orders, section 6 rules, section 7 actions and Title IV. If you import resins in drums for coatings, that starts with whether each substance is on the TSCA Inventory or exempt.

When does a chemical importer file a negative TSCA certification instead of a positive one?

Only when your shipment holds chemicals excluded from TSCA, such as pesticides, foods, drugs, cosmetics or devices, and they are not already clearly identified. EPA says an excluded product can count as clearly identified when another agency's entry filing covers it. A negative certification on a TSCA resin or additive is a wrong statement, not a cautious one, so it is never a safe default.

Is a TSCA certification needed for coated parts and other articles a manufacturer imports?

Usually not. Under 19 CFR 12.121(b), chemicals that are part of an article need certification only when a rule or order under TSCA requires it. A coated bracket or molded housing you import normally carries no section 13 statement. One exception EPA names is TSCA Title VI: composite wood panels and goods containing them have carried their own import certification since March 22, 2019.

Do R&D samples shipped by FedEx, UPS or DHL need a TSCA certification?

Yes, when the sample is a TSCA chemical substance in bulk or in a mixture. EPA states that certification is required for substances received by mail or commercial carrier, including those intended for research and development. The courier may certify as your authorized agent, but the answer comes from your knowledge of the product, so a lab ordering samples from an overseas plant needs the same determination as a production shipment.

When must a TSCA chemical import certification be completed?

Before release of the shipment. 19 CFR 12.121(a)(3) requires the certification to be filed with the port director in writing, or electronically in ACE or another CBP-authorized system, prior to release, with the certifier's name, phone number and email address. A shipment that arrives without one can be detained under 19 CFR 12.122(b)(3) until the certification is properly submitted.

What does a TSCA certification statement look like on an entry?

There are two fixed texts. Positive: I certify that all chemical substances in this shipment comply with all applicable rules or orders under TSCA and that I am not offering a chemical substance for entry in violation of TSCA or any applicable rule or order thereunder. Negative: I certify that all chemicals in this shipment are not subject to TSCA. On paper it is typed or stamped on the entry document or invoice.

Who signs the TSCA certification, the importer or the customs broker?

Either you as importer or your authorized agent, which is often the customs broker transmitting the entry. Whoever is named as certifier gives a name, phone number and email. EPA expects the certification to rest on your own knowledge of what you import, so in practice a broker who certifies is relying on your determination. That is why your broker asks you for a positive or negative answer.

What happens when CBP holds a chemical shipment for a missing TSCA certification?

CBP detains it at your risk and expense and notifies EPA and you. A missing certification is curable: CBP refuses entry until it is properly submitted. If the shipment is held for a suspected substantive violation, you have 20 days to submit documents, EPA decides within 30 days of the detention notice, and the goods must be brought into compliance or exported within 90 days.

What is the TSCA civil penalty per violation for an importer in 2026?

Up to $49,772 per violation for penalties EPA assesses on or after January 8, 2025, the inflation-adjusted level for TSCA section 16(a) in 40 CFR 19.4. The statute sets $37,500 and treats each day a violation continues as a separate violation. If you import a chemical that is not on the Inventory or exempt, your exposure is the TSCA violation itself, not only the paperwork.

Can a chemical importer rely on supplier SDSs and letters to support a TSCA certification?

They are the starting evidence, not the whole answer. EPA's policy at 40 CFR 707.20 says that when you lack actual knowledge of a mixture's composition, you should ask the foreign manufacturer, and that good-faith efforts documented in your files may avoid or mitigate a civil penalty. Keep the supplier declaration, the CAS numbers and the Inventory check together, per product and formulation.

Your next step

Tracking liquidation and protest dates in a spreadsheet?

Hand this to GingerOS.

Check every deadline on one entry Have every deadline tracked for you

Pick a 30-minute slot on the next page with Chen Cui, our CEO. Bring one notice or one SKU list (an ERP export, a spreadsheet or an email will do) and see what GingerOS does with it.

Reviewed by Michael Weick, LCB / CCS
Customs compliance manager with 42 years of experience (ex Subaru of America, Merck, and Motorola).

More in CBP & Customs

Our Risk-Free Promise

Full refund.

If you’re not satisfied before MVP acceptance, get a full refund of your deposit.

Click Me!

See if you qualify