DÀNH CHO NHÀ SẢN XUẤT & NHÀ XUẤT KHẨU
Thiết kế có tính đến thuế quan trước khi chúng tự thiết kế mình vào báo cáo lãi lỗ của bạn.
Việc phân loại bắt đầu từ bảng nguyên vật liệu, không phải ở cảng. GingerControl giúp các nhóm sản phẩm và chuỗi cung ứng nhìn thấy mức phơi nhiễm thuế quan ngay từ lúc thiết kế, để lựa chọn kỹ thuật và quyết định chi phí cập bến diễn ra trong cùng một phòng.
Điểm khởi đầu
Đến lúc một sản phẩm cập cảng, những quyết định quan trọng đã được đưa ra rồi. Lựa chọn vật liệu, xuất xứ, và kiến trúc sản phẩm đều quyết định nó rơi vào mã HTS nào và mức thuế nào áp dụng. GingerControl giúp các nhà sản xuất đưa ra những quyết định đó với dữ liệu thuế quan trong tay, sàng lọc những gì họ xuất khẩu để kiểm soát, và thu hồi những khoản thuế họ đã nộp trên các đầu vào rồi lại rời đi dưới dạng thành phẩm.
Những gì bạn nhận được
Được xây dựng quanh cách nhóm của bạn thực sự làm việc.
Phân loại ở cấp BOM
Đưa vào một bảng nguyên vật liệu và xem mỗi cấu phần ánh xạ tới mã HTS và mức thuế của nó ra sao.
Kiểm tra thuế quan ngay khi thiết kế
Một thay đổi nhỏ về quy cách có thể chuyển một sản phẩm sang một phân loại khác và một mức thuế khác. Phát hiện những điều đó trước khi bộ phận kỹ thuật đóng băng thiết kế.
Lập kế hoạch xuất xứ trên các cơ sở sản xuất
Đối với các nhà sản xuất có cơ sở ở nhiều quốc gia, Parts Library cho thấy xuất xứ nào tạo ra chi phí cập bến tốt nhất cho mỗi thị trường.
BOM-SANG-HTS
Việc phân loại bắt đầu từ thượng nguồn, không phải ở cảng.
Chạy mỗi cấu phần qua HTS Classification Researcher và ánh xạ nó tới mã HTS, mức thuế, và các chương trình đặc biệt áp dụng. Một tỷ lệ pha trộn vải, đinh vít, hay bao bì khác có thể chuyển một sản phẩm sang một nhóm hàng thuận lợi hơn, và Ginger giúp bạn tìm ra những đòn bẩy đó ngay ở giai đoạn thiết kế, chứ không phải sau khi một lô hàng đã bị phân loại lại tại cảng.
PHÍA XUẤT KHẨU
Sàng lọc những gì bạn xuất đi, thu hồi những gì bạn đã nộp.
Export Control Classifier phân loại ECCN cho sản phẩm của bạn đối chiếu với toàn bộ 10 nhóm CCL, trả về một ECCN hoặc EAR99, kèm một báo cáo nghiên cứu bắt buộc cho nhóm tuân thủ hoặc cố vấn pháp lý của bạn. Nó chạy như một quy trình web, chưa có API. Và Duty Drawback thu hồi đến 99% thuế bạn đã nộp trên các đầu vào nhập khẩu rồi lại rời khỏi đất nước dưới dạng thành phẩm xuất khẩu, thường là khoản thu hồi lớn nhất đối với nhóm hồ sơ này.
FAQ
Frequently asked questions
How do we classify HTS codes across a large BOM?
Feed the bill of materials in and classify each component to its HTS code and duty rate in one pass, rather than researching parts one at a time. For a large BOM the exposure hides in the components, and a single wrong code repeated across a product line compounds fast. GingerControl maps each line to its code, duty, and applicable special programs with the GRI reasoning attached, so engineering and compliance finally share the same numbers. We classify the parts; your broker still files the finished-good entries.
How do we reconcile HTS codes across multiple ERPs?
Reconciling codes across several ERPs is handled as a custom integration our services team builds, not a self-serve import. Manufacturers that grew by acquisition often carry the same part under different codes in different systems, which shows up as duty leakage and audit risk. GingerControl scopes a bespoke engagement to pull those catalogs into one consistent classification against a shared methodology. Because it is custom, it starts with discovery and a fixed, milestone-based scope, not an off-the-shelf connector, and we build it rather than file your entries.
How do we handle the annual USITC HTS update process?
Treat the annual USITC HTS revision as a re-check of your catalog against added, modified, and sunset codes, because a subheading you have used for years can change or disappear. GingerControl classifies against a current 20,000-plus code HTS database and our free Trade Policy Digest flags database add, modify, and sunset notifications as they publish, so you see the changes before they hit a shipment. We surface the impact and reclassify; applying the corrected codes at entry stays with your broker, and we do not connect to ACE.
What is the difference between an HTS code and a Schedule B code?
An HTS code classifies goods you import into the U.S., while a Schedule B code classifies goods you export out of it, and the same product can carry a different number on each side. Both build on the 6-digit international HS heading, then diverge at the U.S. level. For a manufacturer that both imports components and exports finished goods, you manage both. GingerControl supports classification from the bill of materials through export; for the export side it also classifies ECCN controls, though that is a web workflow with no API yet.
Should we build or buy HTS classification for our BOMs?
Buy the reasoning engine and keep your team on the judgment calls, unless you have both trade-law depth and engineers to maintain a rules database against constant tariff change. Building in-house means owning GRI logic, CROSS rulings, and every USITC update yourself, which rarely pays off against BOM-scale volume. GingerControl gives you that engine self-serve or by API, with a custom build available when it must live inside your stack. We are builder-not-broker, so buying the tool does not hand us your entry filing or importer-of-record role.
Can we use tariff engineering on imported components?
Yes, tariff engineering means making a deliberate design or sourcing change, a different material blend, fastener, or origin, that lawfully moves a component into a more favorable HTS code, and it works best decided at design time. Once a shipment is reclassified at the port, the cheaper option is already gone. GingerControl lets you compare variants and their duty outcomes at the BOM stage so engineering and landed cost are decided together. We show the levers and the numbers; the sourcing and design decision stays yours, and we are software, not legal counsel.
With capital-goods imports at record levels in 2026, how much does a design-time BOM or origin decision actually move our landed cost?
On Chapter 84 and 85 equipment it can move 15 to 50 points, because the base MFN rate is near zero and almost the entire duty is the Section 232 full-value metals layer plus Section 301, both riding on the classification and origin the BOM fixes. With capital-goods imports at a record $128.0 billion in May 2026 and Section 232 now assessed on the machine's full customs value, that design-time decision moves more landed cost than it used to. GingerControl lets you compare material, fastener, and origin variants and their duty outcomes at the BOM stage, so engineering and landed cost are decided together. We show the levers and the numbers; the sourcing decision stays yours, and we are software, not legal counsel.
Nên xem gì tiếp theo
HTS Classification Researcher
Hỗ trợ phân loại từ bảng nguyên vật liệu cho đến xuất khẩu.
Mở →
Export Control Classifier
Phân loại ECCN trên toàn bộ 10 nhóm CCL, kèm một báo cáo nghiên cứu bắt buộc. Quy trình web, chưa có API.
Mở →
Parts Library
Lập kế hoạch xuất xứ trên các cơ sở sản xuất và xem cơ sở nào tạo ra chi phí cập bến tốt nhất cho mỗi thị trường.
Mở →
Duty Drawback Recovery
Hoàn thuế nhập khẩu trong sản xuất trên các đầu vào nhập khẩu dùng để làm ra thành phẩm xuất khẩu, thường là khoản thu hồi lớn nhất đối với nhóm hồ sơ này.
Mở →
Tariff Calculator
So sánh kết quả thuế trên các nước xuất xứ và mã HTS để tìm chi phí cập bến thấp nhất cho mỗi cơ sở.
Mở →
Assessment Hai Tuần
Định Lượng Cơ Hội Trong Chi Tiêu Thương Mại Của Bạn.
Assessment hai tuần đưa tờ khai nhập khẩu, cước phí vận chuyển và đơn đặt hàng của bạn qua lớp kiểm toán của GingerControl, và trả lại một con số thu hồi bạn có thể trình lên hội đồng quản trị, kèm đầy đủ bằng chứng. Đại lý hải quan của bạn vẫn là đại lý hải quan của bạn.